Industry information
HOME > Industry information

[ 2018/12/21 ] Improper cutting of geotextiles will affect their work efficiency, Do you know?

Author : Guide Nonwoven     
There are many types of non-woven fabrics, which have been introduced before. One of them is geotextile, geotextile, also known as geotextile. It is a water-permeable geosynthetic material made of synthetic fibers by needle punching or weaving. Geotextile is one of the geosynthetic materials. The finished product is cloth-like. It has a width of 4-6 meters and a length of 50-100 meters. Geotextiles are divided into woven geotextiles and non-woven geotextiles.


Geotextile features ( Geotextile Nonwoven Fabric )


1. High strength, due to the use of plastic fibers, it can maintain sufficient strength and elongation in dry and wet conditions.

2, corrosion resistance, long-term corrosion resistance in soil and water of different pH.
3, good water permeability There are gaps between the fibers, so there is good water permeability.
4, good antimicrobial properties Microbes, insects are not damaged.
5. Convenient construction. Because the material is light and soft, it is convenient to transport, lay and construct.
6, complete specifications: the width can reach 9 meters. It is currently the widest product in China, with mass per unit area: 100-1000g/m2.


Geotextiles are widely used in river course engineering, not only when it is used as a filtration layer for filtration effects, but also for protection from isolation and reinforcement. Many people say that improper cutting of geotextiles will affect its work efficiency. 



Why is this? Non-woven fabric manufacturers tell everyone why:


Incorrect cutting of waterproof geotextiles can seriously affect work efficiency and cause waste of waterproof geotextiles. In fact, each waterproof geotextile is suitable for sewing at a width of 20m. If it is too narrow, the waterproof geotextile will be laid and tied many times, resulting in waste and not meeting the requirements of financial control. The cutting of the round head part of the waterproof geotextile is first calculated according to the circular formula c=2πr divided by 2, and the semicircular length of the round head is calculated, that is, the length of the outer edge of the waterproof geotextile is laid, and according to the cutting width of the waterproof geotextile, the compass is pressed according to the width of the waterproof geotextile. The scale of 1:100 is drawn along the outer line, and the number of geotextiles to be cut is drawn, and then according to the number of bottoms. It is not difficult to predict that China's demand for geotextiles will increase significantly in the future.


For more information on non-woven products or products, please visit our website.: www.guiodenonwoven.com